Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Subaru
    3. :
  3. Ascent
    4. : Cabin air filter

Subaru Ascent - Cabin air filter

Cabin Air Filter Subaru Ascent (2018-2026 / mk 1)

Subaru Ascent (2018-2026 / MK 1)
How to Change the Cabin Air Filter on a Subaru Ascent
Replacing the cabin air filter on a Subaru Ascent is a simple task you can do yourself, thanks to our video tutorial that will guide you through the steps. The …Read all…
Posted on 22 September 2026 by ScegliAuto
Subaru Ascent (2018-2026 / MK 1)
How to Replace the Cabin Filter on a Subaru Ascent?
To replace the cabin filter on the Subaru Ascent, open the glove compartment on the passenger side: once the compartment is open, locate the two side clips …Read all…
Posted on 11 August 2026 by ScegliAuto
Subaru Ascent (2018-2026 / MK 1)
How to Replace the Cabin Air Filter in the Subaru Ascent?
In this tutorial, you will see how to replace the cabin air filter in the Subaru Ascent, an extremely simple and quick operation. First, go to the passenger …Read all…
Posted on 22 July 2026 by ScegliAuto
Subaru Ascent (2018-2026 / MK 1)
How to Replace the Cabin Air Filter on a Subaru Ascent?
To replace the cabin air filter on a Subaru Ascent, open the glove compartment located on the passenger side to release the internal fastening clips. This will …Read all…
Posted on 18 July 2026 by ScegliAuto
Car stereo (1) Key (4) Dashboard (1) Air filter (2) Cabin air filter (4) Tail light bulb (1) Interior dome light bulb (1) Engine oil (5) Door trim panel (2) Brake pads (1) Wheel (2) Fuse box (5) Warning light – error code (2) Service warning light (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos