Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the air filter of the Subaru Levorg located?

Model: Subaru Levorg VM - Years 2014-2020
Part: Air filter

In this video we see where the air filter of the Subaru Levorg is located, which is enclosed in a black plastic box near the windshield on the passenger side (or driver's side, depending on whether it is right-hand drive or left-hand drive). We see how to access it: we open the hood, locate the air box, unlock the two side clips that secure the cover and lift it. The filter is inside ready to be inspected or replaced. In this case, we remember that before putting the new filter in place, it is clean, we must clean the box well from dust and residues. We will put the new filter with the arrows pointing downwards and then we can close the box, we are done.

Posted on 19 October 2025 by ScegliAuto

Video tutorial

Related tutorials

What is the Fuse Diagram for the Subaru Levorg?
What is the Fuse Diagram for the Subaru Levorg?
Subaru Levorg (2014-2020 / VM) In this video, we can see where the fuse boxes of the Subaru Levorg are located and their respective diagrams, useful in case you need to check the f…
How to Reset the TPMS on the Subaru Levorg
How to Reset the TPMS on the Subaru Levorg
Subaru Levorg (2014-2020 / VM) Before starting to reset the light on the Subaru Levorg, check and adjust the tyre pressures according to the manufacturer's recommended values. Then…
How to Replace the Remote Battery of a Subaru Levorg?
How to Replace the Remote Battery of a Subaru Levorg?
Subaru Levorg (2014-2020 / VM) Replacing the remote battery of a Subaru Levorg is an extremely simple and cost-effective operation. To do this, you will need a small flat-head scre…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos