Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS on the Subaru Levorg

Model: Subaru Levorg VM - Years 2014-2020
Part:

Before starting to reset the light on the Subaru Levorg, check and adjust the tyre pressures according to the manufacturer's recommended values. Then, turn on the ignition and locate the TPMS reset button on the lower left side of the dashboard, just behind and below the steering wheel, as shown in the video. Press and hold the button for a few seconds, and wait for confirmation: the light will flash three times on the dashboard, indicating that the reset procedure has been successfully completed. At this point, you can turn off the vehicle.

Posted on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

What is the Fuse Diagram for the Subaru Levorg?
What is the Fuse Diagram for the Subaru Levorg?
Subaru Levorg (2014-2020 / VM) In this video, we can see where the fuse boxes of the Subaru Levorg are located and their respective diagrams, useful in case you need to check the f…
How to Replace the Remote Battery of a Subaru Levorg?
How to Replace the Remote Battery of a Subaru Levorg?
Subaru Levorg (2014-2020 / VM) Replacing the remote battery of a Subaru Levorg is an extremely simple and cost-effective operation. To do this, you will need a small flat-head scre…
How to set the time in the Subaru Levorg?
How to set the time in the Subaru Levorg?
Subaru Levorg (2014-2020 / VM) In this tutorial, we can see how to adjust the time in the Subaru Levorg, an extremely simple and quick operation to be carried out, for example, aft…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos