Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Subaru
    3. : Justy

What DIY Jobs Can Be Done on the Subaru Justy?

Model: Subaru Justy MK 1 - Years: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
Part: Wheel

Video tutorial

An interesting DIY job applicable to the Subaru Justy is provided by the attached video guide, where you will learn how to repaint the alloy wheels of the vehicle in question. The first phase involves washing the wheels, then applying a spray paint stripper, allowing it to act, rinsing again, and at this point, you are ready for painting.

Lift the vehicle with a jack, mask the edge of the wheel to avoid dirtying the tyre, start the engine, and paint, starting from the masked edge and proceeding towards the centre. The result will be perfect.


Posted on 1 May 2026 by ScegliAuto


Related tutorials

How to replace the battery of Subaru vehicle remote control.
How to replace the battery of Subaru vehicle remote control.
Subaru Subaru Various Replacing the battery of the remote control for Subaru vehicles is a simple and quick operation to be carried out independently. The battery we will …
How to replace the gear shift knob of the 2022 Subaru WRX
How to replace the gear shift knob of the 2022 Subaru WRX
Subaru Subaru Various In today's video, we will see how to replace the gear knob of the 2022 Subaru WRX. Removing the knob is a simple and quick operation to perform indep…
Repairing the Lumbar Support of the Front Seat in a Subaru Outback
Repairing the Lumbar Support of the Front Seat in a Subaru Outback
Subaru Outback (2003-2009 / BL, BP, MK 3) The video shows how to repair the broken lumbar support of a front seat in a Subaru Outback. This operation can be done independently and takes a max…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos