Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Steering Wheel of the Subaru Forester

Model: Subaru Forester MK 4, SJ - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Steering wheel

See other generations:
Video tutorial

Today, follow these instructions to remove and replace the steering wheel and its airbag on the Subaru Forester. First, get inside the cabin and start by removing the steering wheel airbag by pushing on the rear holes with something thin and pointed; then disconnect the electrical connector, as shown in the video.

Next, unscrew the central screw of the steering wheel to remove it while keeping it perfectly straight; then install the new steering wheel, centring it, connect the various electrical controls, and finally reassemble the airbag.


Updated on 24 August 2026 by ScegliAuto


Related tutorials

Where is the fuse box located in the cabin of the 2010 Subaru Forester?
Subaru Forester (2008-2011 / MK 3, SH) To access the fuses in the cabin of your 2010 Subaru Forester, simply follow the following procedure, which takes only a few seconds to complete. Fir…
Resetting the Service Light on the Subaru Forester
Resetting the Service Light on the Subaru Forester
Subaru Forester (2012-2019 / MK 4, SJ) After changing the engine oil on the Subaru Forester, you need to reset the system that alerts you to this important maintenance task. Sit in the dri…
How to Remove the Dashboard of the Subaru Forester?
How to Remove the Dashboard of the Subaru Forester?
Subaru Forester (2012-2019 / MK 4, SJ) To remove the dashboard of the Subaru Forester, open the glove compartment so it can be detached from its housing. Once removed, proceed by unscrewin…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos