Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel Airbag on a Subaru Forester?

Model: Subaru Forester MK 4, SJ - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Airbag

See other generations:
Video tutorial

To remove the steering wheel airbag on a Subaru Forester, loosen the screws located at the back of the steering wheel, one on the right side and one on the left side. Once these screws are loosened, detach the airbag from its housing to disconnect the connectors at the back.

After the old airbag is completely removed, insert the new one, connecting it to the connectors at the back. Finally, secure it by connecting the screws at the back of the steering wheel.


Updated on 16 June 2026 by ScegliAuto


Related tutorials

How to Replace the Steering Wheel of the Subaru Forester
How to Replace the Steering Wheel of the Subaru Forester
Subaru Forester (2012-2019 / MK 4, SJ) Today, follow these instructions to remove and replace the steering wheel and its airbag on the Subaru Forester. First, get inside the cabin and star…
How to Remove the Dashboard of the Subaru Forester?
How to Remove the Dashboard of the Subaru Forester?
Subaru Forester (2012-2019 / MK 4, SJ) To remove the dashboard of the Subaru Forester, open the glove compartment so it can be detached from its housing. Once removed, proceed by unscrewin…
How to Remove the Dashboard of the Subaru Forester
How to Remove the Dashboard of the Subaru Forester
Subaru Forester (2012-2019 / MK 4, SJ) Today's main steps will show you how to remove and replace the dashboard of the Subaru Forester, following the instructions below. First, get inside …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos