Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Dashboard of the Subaru Forester

Model: Subaru Forester MK 4, SJ - Years 2012-2019
Part: Dashboard

Today's main steps will show you how to remove and replace the dashboard of the Subaru Forester, following the instructions below. First, get inside the vehicle and start by removing the steering wheel and its airbag by disconnecting the electrical connector and unscrewing the central screw. Next, remove the glove compartment and dismantle the central instrumentation, as well as the multimedia system and the climate control buttons, as shown in the video. At this point, unscrew the screws of the dashboard to remove it, following the video tutorial to the end!

Updated on 12 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the storage compartment in the Subaru Forester?
How to disassemble the storage compartment in the Subaru Forester?
Subaru Forester (2012-2019 / MK 4, SJ) In this tutorial we can see how to disassemble the glove compartment in the Subaru Forester, an extremely simple and quick operation, to be carried o…
Where is the fuse box located in the cabin of the 2010 Subaru Forester?
Subaru Forester (2008-2011 / SH, MK 3) To access the fuses in the cabin of your 2010 Subaru Forester, simply follow the following procedure, which takes only a few seconds to complete. Fir…
Replacing the Lambda Sensor on the Subaru Forester
Replacing the Lambda Sensor on the Subaru Forester
Subaru Forester (2008-2011 / SH, MK 3) This guide shows you how to remove and replace the lambda sensor or oxygen sensor on the Subaru Forester, following these simple steps. First, open t…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos