Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Subaru Forester

Model: Subaru Forester MK 4, SJ - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Door trim panel

See other generations:
Video tutorial

Today, we will go through the main instructions on how to remove the front door panel of a Subaru Forester. First, open the front door of the vehicle and start by removing the plastic cover of the grab handle, unscrewing all the fastening screws found on the sides and underneath the handle; then gently pry at the sides of the panel until it is completely removed, disconnecting the handle cable and the electrical connector of the window switch, as shown in the video.

At this point, you will have access to the internal components of the door!


Updated on 7 October 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel on a Subaru Forester
How to Remove the Door Panel on a Subaru Forester
Subaru Forester (2002-2008 / MK 2, SG) Remove the left front door panel of a Subaru Forester. Disconnect the battery terminals located in the engine bay. Using a screwdriver, unscrew the s…
How to remove the rear hatch panel of the Subaru Forester.
How to remove the rear hatch panel of the Subaru Forester.
Subaru Forester (2008-2011 / MK 3, SH) In this guide, we will see the instructions that will allow us to disassemble and remove the interior trim of the rear hatch of the Subaru Forester. …
Removing the Door Panel of the Subaru Forester 4
Removing the Door Panel of the Subaru Forester 4
Subaru Forester (2012-2019 / MK 4, SJ) In this simple guide, learn how to remove the front door panel of the fourth generation Subaru Forester. First, open the front door and start by unsc…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos