Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear hatch panel of the Subaru Forester.

Model: Subaru Forester SH, MK 3 - Years 2008-2011
Part: Door trim panel

In this guide, we will see the instructions that will allow us to disassemble and remove the interior trim of the rear hatch of the Subaru Forester. First, let's open the rear hatch and start unscrewing the fastening screws located on the sides of the rear hatch; then we remove the plastic cover located behind the third brake light, as shown in the video. At this point, we remove the interior trim of the rear hatch, making any necessary repairs or replacements; finally, we reassemble the interior panel!

Posted on 25 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery on a Subaru Forester?
How to Replace the Battery on a Subaru Forester?
Subaru Forester (2012-2019 / MK 4, SJ) To replace the battery on a Subaru Forester, open the bonnet to locate the battery in the engine bay: it is positioned at the front, near the left he…
How do you replace the radio of the Subaru Forester?
How do you replace the radio of the Subaru Forester?
Subaru Forester (2008-2011 / SH, MK 3) In order to replace the car radio of the Subaru Forester, you need to use an object to pry and completely detach the trim panel of the device: once t…
How to Replace the External Wing Mirror on a Subaru Forester?
How to Replace the External Wing Mirror on a Subaru Forester?
Subaru Forester (2012-2019 / MK 4, SJ) To replace the external wing mirror on a Subaru Forester, first detach the door panel by removing its mounting screws. Once the panel is completely r…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos