Do it yourself
| ||||
|
Subaru Forester - Video tutorial
Model: Subaru Forester
SH, MK 3
- Years 2008-2011 Today's guide will show us how to disassemble and replace the rear light of the Subaru Forester, following the instructions below. First, move to the rear of the vehicle and begin to open the rear trunk; then unscrew the fixing screws that we find on the sides of the light, levering on the sides of it to detach it and remove it from the body, as shown in the video. At this point, disconnect the electrical connector of the bulbs, replacing the faulty bulbs if necessary; finally, reassemble the rear light!
Posted on 25 April 2023 by ScegliAuto
|
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.004
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |