Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Subaru
    3. :
  3. Forester
    4. : Tail light

Subaru Forester - Tail light

Tail Light Subaru Forester (2008-2011 / mk 3, sh)

Subaru Forester (2002-2008 / MK 2, SG)
How to remove the rear light of the Subaru Forester?
To remove the rear light of the Subaru Forester, open the rear hatch of the vehicle to access the two screws located at the sides of the corresponding light: …Read all…
Posted on 31 August 2026 by ScegliAuto
Subaru Forester (2008-2011 / MK 3, SH)
Removing the rear light of the Subaru Forester
Today's guide will show you how to remove and replace the rear light of the Subaru Forester, following the instructions below. First, move to the rear of the …Read all…
Posted on 20 October 2026 by ScegliAuto
Subaru Forester (2008-2011 / MK 3, SH)
How to replace and modify the reverse light bulbs on the Subaru Forester
Now let's change the reverse light bulbs to LED bulbs in a Subaru Forester. Start by opening the boot; on the inner side of the light, you will find two screws …Read all…
Posted on 6 August 2026 by ScegliAuto
Subaru Forester (2002-2008 / MK 2, SG)
Instructions for Removing the Rear Light
If there is a dent near the rear light, you need to remove it to carry out the repair effectively. Open the boot and remove the grille located directly in …Read all…
Posted on 14 February 2026 by ScegliAuto

Tail Light Subaru Forester (2002-2008 / mk 2, sg)

Subaru Forester (2002-2008 / MK 2, SG)
How to remove the rear light of the Subaru Forester?
To remove the rear light of the Subaru Forester, open the rear hatch of the vehicle to access the two screws located at the sides of the corresponding light: …Read all…
Posted on 31 August 2026 by ScegliAuto
Subaru Forester (2008-2011 / MK 3, SH)
Removing the rear light of the Subaru Forester
Today's guide will show you how to remove and replace the rear light of the Subaru Forester, following the instructions below. First, move to the rear of the …Read all…
Posted on 20 October 2026 by ScegliAuto
Subaru Forester (2008-2011 / MK 3, SH)
How to replace and modify the reverse light bulbs on the Subaru Forester
Now let's change the reverse light bulbs to LED bulbs in a Subaru Forester. Start by opening the boot; on the inner side of the light, you will find two screws …Read all…
Posted on 6 August 2026 by ScegliAuto
Subaru Forester (2002-2008 / MK 2, SG)
Instructions for Removing the Rear Light
If there is a dent near the rear light, you need to remove it to carry out the repair effectively. Open the boot and remove the grille located directly in …Read all…
Posted on 14 February 2026 by ScegliAuto
Airbag (1) Car stereo (3) Battery (8) Transmission (1) Spark plugs (4) Body (5) Glove compartment (1) Key (17) Timing belt (5) Onboard computer (1) Checks and maintenance (10) Dashboard (3) Brake rotors (1) Headlight (1) Tail light (4) Fog lights (1) Air filter (9) Cabin air filter (13) Fuel filter (1) Diesel fuel filter (2) Oil filter (2) Clutch (1) Light bulb (2) Headlight bulb (8) Tail light bulb (5) Interior dome light bulb (1) License plate light (2) Handle (2) Exhaust muffler (1) Engine (1) Starter motor (1) Transmission fluid (1) Engine oil (7) Clock (13) Door trim panel (10) Front bumper (4) Rear bumper (1) Brake pads (3) Shift knob (1) Fuel pump (1) Car door (1) Radiator (3) Fuse box (17) Seat (2) Oxygen sensor (1) Suspension system (6) Side mirror (6) Warning light – error code (13) Tire pressure warning light (15) Service warning light (15) Manufacturer emblem (1) Windshield wipers (8) Thermostat (3) Blower motor (1) Side window (1) Steering wheel (1)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos