Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace and modify the reverse light bulbs on the Subaru Forester

Model: Subaru Forester MK 3, SH - Years: 2008, 2009, 2010, 2011
Part: Tail light

See other generations:
Video tutorial

Now let's change the reverse light bulbs to LED bulbs in a Subaru Forester. Start by opening the boot; on the inner side of the light, you will find two screws that you will need to unscrew with a cross screwdriver.

At this point, gently pry out the rear light with your hands. Once the light is removed, locate the reverse bulb, rotate the bulb holder slightly counterclockwise, and gently pull the bulb out of the holder.

Now take the new LED bulb, remove it from the packaging, insert it into the holder, and then place it back into its socket by rotating it slightly clockwise. Finally, remount the light in its housing, screw the two screws back into the inner side of the light with the cross screwdriver, close the boot, and test the new LED bulbs.


Updated on 3 June 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Headlamp Bulb on a Subaru Forester?
How to Replace the Rear Headlamp Bulb on a Subaru Forester?
Subaru Forester (2008-2011 / MK 3, SH) Replacing the rear headlamp bulb on a Subaru Forester is a very simple task. You will need a replacement bulb and a 10mm socket. Open the boot lid an…
How to Replace the Rear Light Bulbs on the Subaru Forester
How to Replace the Rear Light Bulbs on the Subaru Forester
Subaru Forester (2012-2019 / MK 4, SJ) This guide will show you how to remove and replace the rear light and its bulbs on the Subaru Forester in simple steps. First, open the boot lid and …
Replacing the Rear Light Bulbs on the Subaru Forester
Replacing the Rear Light Bulbs on the Subaru Forester
Subaru Forester (2012-2019 / MK 4, SJ) In this brief guide, we will see the instructions on how to remove and replace the rear light bulbs on the Subaru Forester. First, open the tailgate …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos