Do it yourself
| ||||
|
Subaru Forester - Video tutorial
Model: Subaru Forester
MK 4, SJ
- Years 2012-2019 In order to replace the Subaru Forester headlight bulb, you need to open the hood to access the rear part of the headlight: here you will need to disconnect the connector connected to the bulb and extract the latter from its housing. Once the old bulb has been removed, the new one can be connected to the connector and inserted into its housing. The same operation can also be performed for the other headlight. After replacing the bulbs, you can then check that they are working by closing the hood as well.
Posted on 23 July 2022 by ScegliAuto
Other guides that may interest you
|
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.065
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |