Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Subaru Outback?

Model: Subaru Outback BL, BP, MK 3 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Light bulb

See other generations:
Video tutorial

To replace the front headlamp bulb on a Subaru Outback, open the bonnet to access the rear of the headlamp corresponding to the bulb to be replaced. Here, disconnect the connector attached to the bulb and remove it from its housing, replacing it with a new one. The new part must then be connected to its connector and inserted into the designated housing in the headlamp.

After the new bulb is inserted, close the bonnet, ensuring that the device is functioning.


Updated on 8 June 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb on a Subaru Outback?
How to Replace the Front Headlight Bulb on a Subaru Outback?
Subaru Outback (2014-2019 / BS, MK 5) To replace the bulb on a Subaru Outback, open the bonnet to access the rear of the headlight: here you will find the connector that must be disconnec…
How to Replace the Front Headlight Bulb on a Subaru Outback
How to Replace the Front Headlight Bulb on a Subaru Outback
Subaru Outback (2009-2014 / BR, BM, MK 4) To replace the bulb on the Subaru Outback, open the bonnet to access the rear of the headlight: here, you will find the connector that needs to be di…
Replacing the Front Fog Light Bulb on the Subaru Outback
Replacing the Front Fog Light Bulb on the Subaru Outback
Subaru Outback (2009-2014 / BR, BM, MK 4) Here are the steps to remove and replace the front fog light bulb on the Subaru Outback. First, move to the front of the vehicle and start by removin…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos