Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front fog light bulb of the Subaru Outback

Model: Subaru Outback MK 4, BM, BR - Years 2009-2014
Part: Fog lights

Below we will see the steps that will allow us to disassemble and replace the front fog light bulb of the Subaru Outback. First, move to the front of the vehicle and start by removing the small plastic cover under the front bumper, in order to access the fog light bulb; then disconnect the electrical connector and remove the bulb, as shown in the video. At this point, install the new front fog light, with the same attachment; then secure it properly and finally reassemble the plastic cover!

Posted on 18 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Dipped Beam Bulb on the Subaru Outback
Replacing the Dipped Beam Bulb on the Subaru Outback
Subaru Outback (2009-2014 / MK 4, BM, BR) Today, we will look at the main instructions to remove and replace the front headlight bulb on the Subaru Outback. To access the dipped beam bulb, it…
How to Replace the Front Headlight Bulb on a Subaru Outback
How to Replace the Front Headlight Bulb on a Subaru Outback
Subaru Outback (2009-2014 / MK 4, BM, BR) To replace the bulb on the Subaru Outback, open the bonnet to access the rear of the headlight: here, you will find the connector that needs to be di…
Replacement of the rear headlight bulbs of the Subaru Outback
Replacement of the rear headlight bulbs of the Subaru Outback
Subaru Outback (2003-2009 / BL, BP, MK 3) Through this process, we will discover the steps that will allow us to disassemble and replace the rear headlight bulbs of the Subaru Outback. First …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos