Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Fog Lights on the Subaru Outback

Model: Subaru Outback BR, BM, MK 4 - Years: 2009, 2010, 2011, 2012, 2013, 2014
Part: Fog lights

See other generations:
Video tutorial

Watch this video for the main instructions to remove and replace the front fog light on the Subaru Outback in simple and quick steps. First, lift the vehicle and start by removing the clips located under the front bumper; then disconnect the bulb connector along with the light, as shown in the video.

At this point, remove the clips of the front fog light to detach it from the bumper; replace the entire fog light unit with a new one, or just the bulb, following the reverse procedure of disassembly!


Updated on 18 June 2026 by ScegliAuto


Related tutorials

How to Locate Fuses and Understand Diagrams in a Subaru Outback
How to Locate Fuses and Understand Diagrams in a Subaru Outback
Subaru Outback (2009-2014 / BR, BM, MK 4) The first fuse panel in a Subaru Outback can be found inside the vehicle, located behind the dashboard on the lower left side of the steering wheel, …
Replacing the Front Bumper Grille on a Subaru Outback
Replacing the Front Bumper Grille on a Subaru Outback
Subaru Outback (2003-2009 / BL, BP, MK 3) Today, we will see in this short and simple video how to remove and replace the front bumper grille on a Subaru Outback. First, remove the plastic cl…
How to Remove the Front Bumper of the Subaru Outback?
How to Remove the Front Bumper of the Subaru Outback?
Subaru Outback (2003-2009 / BL, BP, MK 3) To remove the front bumper of the Subaru Outback, first remove the fastening rivets and screws located at the bottom of the bumper, disconnecting the…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos