Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Bumper Grille on a Subaru Outback

Model: Subaru Outback BL, BP, MK 3 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Grille

See other generations:
Video tutorial

Today, we will see in this short and simple video how to remove and replace the front bumper grille on a Subaru Outback. First, remove the plastic clips and screws located under the front bumper, then disconnect the fog light electrical connector.

Next, unscrew the bolts found on both sides of the wheel arches to detach the bumper from the sides, as shown in the video. Now, remove the upper clips of the grille to detach it from the bumper; replace it and reassemble everything by reversing the disassembly process!


Updated on 7 May 2026 by ScegliAuto


Related tutorials

How to replace the front headlight of the Subaru Outback
How to replace the front headlight of the Subaru Outback
Subaru Outback (2009-2014 / BR, BM, MK 4) These short and simple steps will illustrate the process of disassembling and replacing the front headlight of the Subaru Outback. First, we open the…
Replacing the Front Fog Lights on the Subaru Outback
Replacing the Front Fog Lights on the Subaru Outback
Subaru Outback (2009-2014 / BR, BM, MK 4) Watch this video for the main instructions to remove and replace the front fog light on the Subaru Outback in simple and quick steps. First, lift the…
Replacing the Front Fog Light Bulb on the Subaru Outback
Replacing the Front Fog Light Bulb on the Subaru Outback
Subaru Outback (2009-2014 / BR, BM, MK 4) Here are the steps to remove and replace the front fog light bulb on the Subaru Outback. First, move to the front of the vehicle and start by removin…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos