Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Bumper of the Subaru Forester

Model: Subaru Forester MK 4, SJ - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Front bumper

See other generations:
Video tutorial

Today, we will discover the key information for removing and replacing the front bumper of the Subaru Forester. First, open the vehicle's bonnet and start removing all the securing screws and clips found at the top and bottom of the front bumper; remove the additional clips located on both sides of the front wheel arches, as shown in the video.

At this point, gently detach the bumper from the sides until it is completely removed, then install the new front bumper (fixing it correctly), following the video to the end!


Updated on 20 September 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of the Subaru Forester?
How to Remove the Front Bumper of the Subaru Forester?
Subaru Forester (2012-2019 / MK 4, SJ) To remove the front bumper of the Subaru Forester, open the bonnet to access the screws at the front of the engine bay that secure the bumper at the …
Removing the Front Wing from a Subaru Forester
Removing the Front Wing from a Subaru Forester
Subaru Forester (2012-2019 / MK 4, SJ) Let's see in this video how to remove the front bumper from a Subaru Forester. Lift the bonnet and secure it. Use a plastic lever to remove the secur…
How to Remove the Front Bumper of the Subaru Forester 2
How to Remove the Front Bumper of the Subaru Forester 2
Subaru Forester (2002-2008 / MK 2, SG) In this brief video, follow the main steps to remove the front bumper of the second series Subaru Forester. First, open the bonnet and remove the pla…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos