Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of the Subaru Forester 2

Model: Subaru Forester MK 2, SG - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Front bumper

See other generations:
Video tutorial

In this brief video, follow the main steps to remove the front bumper of the second series Subaru Forester. First, open the bonnet and remove the plastic clips located above the bumper, which will allow you to take off the front grille; then remove the additional clips found underneath, as shown in the video.

Next, remove the screws located on both sides of the front wheel arches; unscrew the screws underneath the bumper to detach it from the sides until it is completely removed. Apply the reverse procedure for reassembly!


Updated on 6 May 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of the Subaru Forester?
How to Remove the Front Bumper of the Subaru Forester?
Subaru Forester (2012-2019 / MK 4, SJ) To remove the front bumper of the Subaru Forester, open the bonnet to access the screws at the front of the engine bay that secure the bumper at the …
Replacing the Front Bumper of the Subaru Forester
Replacing the Front Bumper of the Subaru Forester
Subaru Forester (2012-2019 / MK 4, SJ) Today, we will discover the key information for removing and replacing the front bumper of the Subaru Forester. First, open the vehicle's bonnet and …
Removing the Front Wing from a Subaru Forester
Removing the Front Wing from a Subaru Forester
Subaru Forester (2012-2019 / MK 4, SJ) Let's see in this video how to remove the front bumper from a Subaru Forester. Lift the bonnet and secure it. Use a plastic lever to remove the secur…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos