Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Damaged Bolt on Front Wheel of Subaru Outback

Model: Subaru Outback BS, MK 5 - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Wheel

See other generations:
Video tutorial

Today, you will learn how to remove a damaged (stripped) bolt from the front wheel of a Subaru Outback. Loosen the bolts on the affected wheel, raise the car with a jack, and finish unscrewing the bolts before removing the wheel.

Remove the entire assembly related to the brake caliper (refer to other tutorials if needed). Now you have the space to work on the bolt: undo the nut behind the disc and tap it out with a hammer and a piece of wood, or a rubber mallet.

Help yourself by unscrewing it with your hands, especially when you reach the less damaged parts.


Updated on 4 May 2026 by ScegliAuto


Related tutorials

Replacing the Front Wheel Hub of the Subaru Outback 4
Replacing the Front Wheel Hub of the Subaru Outback 4
Subaru Outback (2009-2014 / BR, BM, MK 4) In this video, follow the main steps to remove and replace the front wheel hub or bearing of the fourth-generation Subaru Outback. First, lift the ve…
Replacing the Dipped Beam Bulb on the Subaru Outback
Replacing the Dipped Beam Bulb on the Subaru Outback
Subaru Outback (2009-2014 / BR, BM, MK 4) Today, we will look at the main instructions to remove and replace the front headlight bulb on the Subaru Outback. To access the dipped beam bulb, it…
Replacing the Front Brake Pads on the Subaru Outback MK4
Replacing the Front Brake Pads on the Subaru Outback MK4
Subaru Outback (2009-2014 / BR, BM, MK 4) In this video, learn how to remove and replace the front brake discs and pads on the fourth series Subaru Outback, following the instructions below. …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos