Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Dipped Beam Bulb on the Subaru Outback

Model: Subaru Outback BR, BM, MK 4 - Years: 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight bulb

See other generations:
Video tutorial

Today, we will look at the main instructions to remove and replace the front headlight bulb on the Subaru Outback. To access the dipped beam bulb, it will be necessary to remove the front wheel and access the wheel arch; then remove the plastic cover protecting the bulb, as shown in the video.

At this point, disconnect the electrical connector of the bulb by releasing the metal clip to remove it; replace it with a new one of the same fitting, reconnect the electrical connection, and refit the front wheel!


Updated on 15 July 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulbs in a Subaru Outback?
How to Replace the Front Headlight Bulbs in a Subaru Outback?
Subaru Outback (2009-2014 / BR, BM, MK 4) Replacing the front headlight bulbs in a Subaru Outback is very simple. Follow this tutorial to proceed. The video shows the operation with the headl…
How to Replace the Dipped Headlight Bulbs on a Subaru Outback
How to Replace the Dipped Headlight Bulbs on a Subaru Outback
Subaru Outback (2009-2014 / BR, BM, MK 4) In this video, learn how to replace the dipped headlight bulbs on a Subaru Outback. Start by turning the wheels to the left to replace the bulb on th…
Replacing Front Headlight Bulb on Subaru Outback
Replacing Front Headlight Bulb on Subaru Outback
Subaru Outback (2003-2009 / BL, BP, MK 3) Let’s see how to replace the blown bulbs in the front compartment of the Subaru Outback. Open the front bonnet by pulling the lever located in the ve…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos