Do it yourself
| ||||
|
Subaru Outback - Video tutorial
Model: Subaru Outback
BM, BR, MK 4
- Years 2009-2014 The replacement of the bulb on the Subaru Outback is done by opening the hood so that the rear part of the headlight can be accessed: here, there will be a connector that needs to be disconnected in order to remove the old bulb from its housing. Once the old bulb has been removed, the new one can be connected to its connector. Once it is connected to the connector, it can be inserted into its housing and the hood can be closed, making sure that the new device is functioning correctly.
Posted on 3 July 2023 by ScegliAuto
Other guides that may interest you
|
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.046
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |