Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Front Headlights of the Subaru Outback 3

Model: Subaru Outback BL, BP, MK 3 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Headlight

See other generations:
Video tutorial

Today, follow the necessary procedure to dismantle and replace the front headlights of the third series Subaru Outback by following these simple steps. First, open the bonnet and remove the plastic clips located at the top and bottom of the front bumper; then unscrew the bolts found on both sides of the wheel arches, releasing the bumper at the sides.

At this point, disconnect the electrical connector of the bulbs to remove the front bumper; unscrew the bolts of the headlight to remove it and replace it with the new one.


Updated on 2 June 2026 by ScegliAuto


Related tutorials

Replace the Front Speakers of the Subaru Outback 23
Replace the Front Speakers of the Subaru Outback 23
Subaru Outback (2003-2009 / BL, BP, MK 3) Today, in this video tutorial, see how to remove and replace the front speakers of the third series Subaru Outback. First, open the front door and st…
How to replace the rear wiper on the Subaru Outback
How to replace the rear wiper on the Subaru Outback
Subaru Outback (2014-2019 / BS, MK 5) Here are the instructions to remove and replace the rear wiper on the Subaru Outback. First, move to the rear of the vehicle and lift the wiper arm; …
How to Remove the Rear Bumper of the Subaru Outback
How to Remove the Rear Bumper of the Subaru Outback
Subaru Outback (2003-2009 / BL, BP, MK 3) To remove the rear bumper of the Subaru Outback, you must first detach the rear lights by loosening the corresponding screws, which are accessible on…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos