Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Front Speakers of the Subaru Outback 23

Model: Subaru Outback BL, BP, MK 3 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Speaker

See other generations:
Video tutorial

Today, in this video tutorial, see how to remove and replace the front speakers of the third series Subaru Outback. First, open the front door and start by removing the various plastic covers and plugs found on the panel, unscrewing the screws underneath; then remove the panel from the sides, disconnecting the electrical connector of the switch panel and the handle cable.

At this point, use a cross screwdriver to unscrew the side screws of the speaker, disconnecting the electrical connector; all that’s left is to replace the entire unit!


Updated on 3 June 2026 by ScegliAuto


Related tutorials

Replacing Speakers on a Subaru Outback
Replacing Speakers on a Subaru Outback
Subaru Outback (2014-2019 / BS, MK 5) To access the speakers, you first need to remove the door panel: using a small flat screwdriver, remove the small cover near the opening handle and t…
How to Reset the Tyre Pressure Warning Light on a Subaru Outback
How to Reset the Tyre Pressure Warning Light on a Subaru Outback
Subaru Outback (2009-2014 / BR, BM, MK 4) Before you begin, exit the cabin of your Subaru Outback. Start by checking and inflating the car's tyres until they all reach the correct pressure. N…
Replacing the Front Fog Lights on the Subaru Outback
Replacing the Front Fog Lights on the Subaru Outback
Subaru Outback (2009-2014 / BR, BM, MK 4) Watch this video for the main instructions to remove and replace the front fog light on the Subaru Outback in simple and quick steps. First, lift the…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos