Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Handle on a Subaru Outback

Model: Subaru Outback BL, BP, MK 3 - Years 2003-2009
Part: Handle

To replace the external handle on a Subaru Outback, loosen the screws securing the corresponding door panel: these are located at the internal handle and under the central armrest trim. Once unscrewed, you can completely detach the panel to access the screws securing the handle mechanism from the inside. By unscrewing these screws and disconnecting the connectors, the handle can be removed from the outer side of the door and replaced with a new spare part.

Updated on 20 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the External Wing Mirror on a Subaru Outback?
How to Replace the External Wing Mirror on a Subaru Outback?
Subaru Outback (2003-2009 / BL, BP, MK 3) To replace the wing mirror on a Subaru Outback, first remove the door panel. To do this, unscrew the bolts located at the internal handle and under t…
How to Remove the Door Panel of a Subaru Outback MK3
How to Remove the Door Panel of a Subaru Outback MK3
Subaru Outback (2003-2009 / BL, BP, MK 3) Discover the procedure necessary to remove the front door panel of the Subaru Outback MK3. First, open the front door and start by removing the small…
Where is the OBD2 Port on the Subaru Outback 5?
Where is the OBD2 Port on the Subaru Outback 5?
Subaru Outback (2014-2019 / BS, MK 5) To access the data from the ECU of your Subaru Outback fifth series, you need to know the exact location of the OBD port to connect a diagnostic tool…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos