Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Wing Mirror on a Subaru Outback?

Model: Subaru Outback BL, BP, MK 3 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Side mirror

See other generations:
Video tutorial

To replace the wing mirror on a Subaru Outback, first remove the door panel. To do this, unscrew the bolts located at the internal handle and under the trim of the grab handle.

Once the screws are loosened, disconnect the connectors inside and completely remove the panel to access the screws that secure the mirror from the inside. By unscrewing these bolts, you can then slide the wing mirror out from the outside and replace it with a new spare part.


Updated on 16 June 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on the Subaru Outback?
How to Replace the Air Filter on the Subaru Outback?
Subaru Outback (1999-2003 / BH, BE, MK 2) As shown in this tutorial, replacing the engine air filter on the Subaru Outback is a very simple and cost-effective task. First, to work safely, ens…
How to Reset the Tyre Pressure Warning Light on a Subaru Outback
How to Reset the Tyre Pressure Warning Light on a Subaru Outback
Subaru Outback (2009-2014 / BR, BM, MK 4) Before you begin, exit the cabin of your Subaru Outback. Start by checking and inflating the car's tyres until they all reach the correct pressure. N…
Where is the OBD2 Port on the Subaru Outback 5?
Where is the OBD2 Port on the Subaru Outback 5?
Subaru Outback (2014-2019 / BS, MK 5) To access the data from the ECU of your Subaru Outback fifth series, you need to know the exact location of the OBD port to connect a diagnostic tool…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos