Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Door Handle of the Subaru Forester

Model: Subaru Forester MK 2, SG - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Handle

See other generations:
Video tutorial

This guide outlines the steps to remove and replace the external door handle of the Subaru Forester, following the instructions below. First, open the car door and start by removing the door panel, unscrewing the fastening screws; then, unscrew the screws of the lock located on the side using a cross screwdriver, as shown in the video.

At this point, remove the first triangular piece of the handle, then remove the handle completely; replace it with the new one!


Updated on 12 May 2026 by ScegliAuto


Related tutorials

How to Replace the External Door Handle on a Subaru Forester?
How to Replace the External Door Handle on a Subaru Forester?
Subaru Forester (2008-2011 / MK 3, SH) To replace the external door handle on a Subaru Forester, open the corresponding door and loosen the screw located inside the side hole. Once this sc…
How to Remove the Door Panel on a Subaru Forester
How to Remove the Door Panel on a Subaru Forester
Subaru Forester (2002-2008 / MK 2, SG) Remove the left front door panel of a Subaru Forester. Disconnect the battery terminals located in the engine bay. Using a screwdriver, unscrew the s…
Removing the Door Panel of the Subaru Forester 4
Removing the Door Panel of the Subaru Forester 4
Subaru Forester (2012-2019 / MK 4, SJ) In this simple guide, learn how to remove the front door panel of the fourth generation Subaru Forester. First, open the front door and start by unsc…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos