Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Door of the Subaru Forester

Model: Subaru Forester - Years 2002-2008
Part: Car door

The instructions in this guide will show you how to remove and replace the front door of the Subaru Forester. First, open the vehicle's door and start by removing the plastic cover located at the bottom of the pillar, then disconnect the door wiring located between the front wing and the door itself; then unscrew the fixing screws of the hinges while holding the door up, as shown in the video. At this point, remove the front door, replacing it with a new one if necessary; reassemble and reconnect everything!

Posted on 26 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the door panel of the Subaru Forester
How to disassemble the door panel of the Subaru Forester
Subaru Forester (2012-2019 / MK 4, SJ) Today we will see the main instructions on how to disassemble and remove the front door panel of the Subaru Forester. First, we open the front door o…
Removing the Door Panel of the Subaru Forester 4
Removing the Door Panel of the Subaru Forester 4
Subaru Forester (2012-2019 / MK 4, SJ) In this simple guide, learn how to remove the front door panel of the fourth generation Subaru Forester. First, open the front door and start by unsc…
How to Remove the Door Panel on a Subaru Forester
How to Remove the Door Panel on a Subaru Forester
Subaru Forester (2002-2008 / SG, MK 2) Remove the left front door panel of a Subaru Forester. Disconnect the battery terminals located in the engine bay. Using a screwdriver, unscrew the s…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos