Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Subaru
    3. :
  3. Forester
    4. : Car door

Subaru Forester - Car door

Car Door Subaru Forester (2002-2008 / )

Subaru Forester (2002-2008 / )
How to Remove the Front Door of the Subaru Forester
The instructions in this guide will show you how to remove and replace the front door of the Subaru Forester. First, open the vehicle's door and start by …Read all…
Posted on 26 September 2026 by ScegliAuto
Airbag (1) Car stereo (3) Battery (8) Transmission (1) Spark plugs (4) Body (5) Glove compartment (1) Key (16) Timing belt (5) Onboard computer (1) Checks and maintenance (10) Dashboard (3) Brake rotors (1) Headlight (1) Tail light (4) Fog lights (1) Air filter (9) Cabin air filter (13) Fuel filter (1) Diesel fuel filter (2) Oil filter (2) Clutch (1) Light bulb (2) Headlight bulb (8) Tail light bulb (5) Interior dome light bulb (1) License plate light (2) Handle (2) Exhaust muffler (1) Engine (1) Starter motor (1) Transmission fluid (1) Engine oil (7) Clock (13) Door trim panel (10) Front bumper (4) Rear bumper (1) Brake pads (3) Shift knob (1) Fuel pump (1) Car door (1) Radiator (3) Fuse box (17) Seat (2) Oxygen sensor (1) Suspension system (6) Side mirror (6) Warning light – error code (13) (10) Tire pressure warning light (4) Service warning light (15) Manufacturer emblem (1) Windshield wipers (8) Thermostat (3) Blower motor (1) Side window (1) Steering wheel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos