Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Subaru
    3. :
  3. Forester
    4. : Suspension system

Subaru Forester - Suspension system

Suspension System Subaru Forester (2008-2011 / mk 3, sh)

Subaru Forester (2008-2011 / MK 3, SH)
Replacing the Rear Suspension on the Subaru Forester
Below are the instructions for removing and replacing the rear suspension on the Subaru Forester. First, lift the vehicle and remove the rear wheel; then, …Read all…
Posted on 17 August 2026 by ScegliAuto
Subaru Forester (2002-2008 / MK 2, SG)
Removing the Rear Shock Absorber
In general, in rear suspensions, the damper and spring (which make up a shock absorber) are not co-axial as in the case of front suspensions. However, for the …Read all…
Posted on 25 February 2026 by ScegliAuto
Subaru Forester (2002-2008 / MK 2, SG)
Rear Shock Absorber Replacement
To install new shock absorbers, start by unscrewing the fastening bolts of the rear wheel before lifting the vehicle. Position the car on suitable axle stands …Read all…
Posted on 22 February 2026 by ScegliAuto
Subaru Forester (2002-2008 / MK 2, SG)
Front Shock Absorber Replacement
Loosen the wheel fastening bolts without removing them before lifting the vehicle with the jack; after lifting it, apply a suitable axle stand and complete the …Read all…
Posted on 22 February 2026 by ScegliAuto
Subaru Forester (2008-2011 / MK 3, SH)
Replacing Rear Shock Absorbers
In this video tutorial, the rear shock absorbers of a Subaru Forester are removed and replaced. First, the wear level of the old suspension is measured after …Read all…
Posted on 21 February 2026 by ScegliAuto
Subaru Forester (2002-2008 / MK 2, SG)
Replacing Front Shock Absorbers
Loosen the wheel fixing bolts before lifting the vehicle, then raise it with a jack and secure it on appropriate axle stands; proceed to dismantle the shock …Read all…
Posted on 20 February 2026 by ScegliAuto

Suspension System Subaru Forester (2002-2008 / mk 2, sg)

Subaru Forester (2008-2011 / MK 3, SH)
Replacing the Rear Suspension on the Subaru Forester
Below are the instructions for removing and replacing the rear suspension on the Subaru Forester. First, lift the vehicle and remove the rear wheel; then, …Read all…
Posted on 17 August 2026 by ScegliAuto
Subaru Forester (2002-2008 / MK 2, SG)
Removing the Rear Shock Absorber
In general, in rear suspensions, the damper and spring (which make up a shock absorber) are not co-axial as in the case of front suspensions. However, for the …Read all…
Posted on 25 February 2026 by ScegliAuto
Subaru Forester (2002-2008 / MK 2, SG)
Rear Shock Absorber Replacement
To install new shock absorbers, start by unscrewing the fastening bolts of the rear wheel before lifting the vehicle. Position the car on suitable axle stands …Read all…
Posted on 22 February 2026 by ScegliAuto
Subaru Forester (2002-2008 / MK 2, SG)
Front Shock Absorber Replacement
Loosen the wheel fastening bolts without removing them before lifting the vehicle with the jack; after lifting it, apply a suitable axle stand and complete the …Read all…
Posted on 22 February 2026 by ScegliAuto
Subaru Forester (2008-2011 / MK 3, SH)
Replacing Rear Shock Absorbers
In this video tutorial, the rear shock absorbers of a Subaru Forester are removed and replaced. First, the wear level of the old suspension is measured after …Read all…
Posted on 21 February 2026 by ScegliAuto
Subaru Forester (2002-2008 / MK 2, SG)
Replacing Front Shock Absorbers
Loosen the wheel fixing bolts before lifting the vehicle, then raise it with a jack and secure it on appropriate axle stands; proceed to dismantle the shock …Read all…
Posted on 20 February 2026 by ScegliAuto
Airbag (1) Car stereo (3) Battery (8) Transmission (1) Spark plugs (4) Body (5) Glove compartment (1) Key (17) Timing belt (5) Onboard computer (1) Checks and maintenance (10) Dashboard (3) Brake rotors (1) Headlight (1) Tail light (4) Fog lights (1) Air filter (9) Cabin air filter (13) Fuel filter (1) Diesel fuel filter (2) Oil filter (2) Clutch (1) Light bulb (2) Headlight bulb (8) Tail light bulb (5) Interior dome light bulb (1) License plate light (2) Handle (2) Exhaust muffler (1) Engine (1) Starter motor (1) Transmission fluid (1) Engine oil (7) Clock (13) Door trim panel (10) Front bumper (4) Rear bumper (1) Brake pads (3) Shift knob (1) Fuel pump (1) Car door (1) Radiator (3) Fuse box (17) Seat (2) Oxygen sensor (1) Suspension system (6) Side mirror (6) Warning light – error code (13) Tire pressure warning light (15) Service warning light (15) Manufacturer emblem (1) Windshield wipers (8) Thermostat (3) Blower motor (1) Side window (1) Steering wheel (1)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos