Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Rear Shock Absorber Replacement

Model: Subaru Forester MK 2, SG - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Suspension system

See other generations:
Video tutorial

To install new shock absorbers, start by unscrewing the fastening bolts of the rear wheel before lifting the vehicle. Position the car on suitable axle stands and complete the removal of the wheel to access the shock absorber easily.

Then unscrew the fastening bolts of the shock absorber to the hub support and those of the respective support inside the boot. Proceed in reverse for the installation of the new shock absorbers, placing it in its seat and tightening the respective fastening bolts, both to the hub and inside the boot.


Updated on 15 February 2026 by ScegliAuto


Related tutorials

Replacing Rear Shock Absorbers
Replacing Rear Shock Absorbers
Subaru Forester (2008-2011 / MK 3, SH) In this video tutorial, the rear shock absorbers of a Subaru Forester are removed and replaced. First, the wear level of the old suspension is measur…
Replacing the Rear Suspension on the Subaru Forester
Replacing the Rear Suspension on the Subaru Forester
Subaru Forester (2008-2011 / MK 3, SH) Below are the instructions for removing and replacing the rear suspension on the Subaru Forester. First, lift the vehicle and remove the rear wheel; …
Replacing Front Shock Absorbers
Replacing Front Shock Absorbers
Subaru Forester (2002-2008 / MK 2, SG) Loosen the wheel fixing bolts before lifting the vehicle, then raise it with a jack and secure it on appropriate axle stands; proceed to dismantle th…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos