Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Front Seat of the Subaru Forester

Model: Subaru Forester MK 4, SJ - Years 2012-2019
Part: Seat

Let’s discover the step-by-step instructions to dismantle the front seat of the driver or passenger in the Subaru Forester. First, open the front door and start by unscrewing all the screws found on the front seat rails using a 14 millimetre socket spanner, moving it back and forth. Then, disconnect the airbag electrical connector located under the seat, as shown in the video. At this point, completely remove the seat from the vehicle; for reassembly, simply apply the reverse procedure!

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter on a Subaru Forester 5
How to Replace the Cabin Filter on a Subaru Forester 5
Subaru Forester (2018-2025 / MK 5, SK) In this mini guide dedicated to your Subaru Forester fifth generation (2019-2023), we will discover how to correctly and independently replace the ca…
Where is the fuse box located in the cabin of the 2010 Subaru Forester?
Subaru Forester (2008-2011 / SH, MK 3) To access the fuses in the cabin of your 2010 Subaru Forester, simply follow the following procedure, which takes only a few seconds to complete. Fir…
How to Remove the Dashboard of the Subaru Forester
How to Remove the Dashboard of the Subaru Forester
Subaru Forester (2012-2019 / MK 4, SJ) Today's main steps will show you how to remove and replace the dashboard of the Subaru Forester, following the instructions below. First, get inside …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos