Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Car Radio from a Subaru Forester

Model: Subaru Forester MK 3, SH - Years: 2008, 2009, 2010, 2011
Part: Car stereo

See other generations:
Video tutorial

Before you start, sit in the driver's seat of your Subaru Forester. Using a thin but sturdy tool and prying it, begin by removing the car radio frame.

This will expose the screws that secure the car radio to the dashboard. Proceed to unscrew and remove these screws, thus freeing the car radio.

Once you have removed the screws, you can extract the car radio, reaching the rear plugs, which you will need to disconnect. Once you have completed this step, you can remove the car radio, and the disassembly will be finished.


Updated on 3 April 2026 by ScegliAuto


Related tutorials

How to Install Logo Projector Puddle Lights on a Subaru Forester
How to Install Logo Projector Puddle Lights on a Subaru Forester
Subaru Forester (2012-2019 / MK 4, SJ) In this video, you will see a small Class E detail modification on the Subaru Forester, which generally applies to all Subaru models, ensuring that y…
Where is the fuse box located in the cabin of the 2010 Subaru Forester?
Subaru Forester (2008-2011 / MK 3, SH) To access the fuses in the cabin of your 2010 Subaru Forester, simply follow the following procedure, which takes only a few seconds to complete. Fir…
Removing the rear light of the Subaru Forester
Removing the rear light of the Subaru Forester
Subaru Forester (2008-2011 / MK 3, SH) Today's guide will show you how to remove and replace the rear light of the Subaru Forester, following the instructions below. First, move to the rea…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos