Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Rear Shock Absorbers

Model: Subaru Forester SH, MK 3 - Years 2008-2011
Part: Suspension system

In this video tutorial, the rear shock absorbers of a Subaru Forester are removed and replaced. First, the wear level of the old suspension is measured after 130,000 miles. New suspension parts are then taken and compared with the old ones. To carry out this operation, it is necessary to lift the vehicle with a lift. The new rear suspension is fitted (the procedure is not shown) after which its effectiveness is tested: first by standing on the rear bumper and rocking the car, then on the road, driving on a snowy road.

Updated on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Subaru Forester (2002-2008 / SG, MK 2) To install new shock absorbers, start by unscrewing the fastening bolts of the rear wheel before lifting the vehicle. Position the car on suitable ax…
Subaru Forester (2002-2008 / SG, MK 2) Loosen the wheel fixing bolts before lifting the vehicle, then raise it with a jack and secure it on appropriate axle stands; proceed to dismantle th…
Subaru Forester (2008-2011 / SH, MK 3) Below are the instructions for removing and replacing the rear suspension on the Subaru Forester. First, lift the vehicle and remove the rear wheel; …

How to Open the Fuel Cap of the Volkswagen Jetta

When you need to refuel this vehicle, first open the fuel filler flap. Follow these simple instructions, and you can also watch the video for more details. First, unlock the central locking to open the flaps. Then, press the fuel cap with your hand to unlock it and open it. Underneath, you will find the fuel cap, which you need to unscrew counterclockwise. At this point, you can proceed to refuel.

Watch the video!


by ScegliAuto

More videos