Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper of the Subaru Outback

Model: Subaru Outback BL, BP, MK 3 - Years 2003-2009
Part: Rear bumper

To remove the rear bumper of the Subaru Outback, you must first detach the rear lights by loosening the corresponding screws, which are accessible only by opening the boot of the car. Once the screws are removed, disconnect the lights and pull them out of their housing to access the screws underneath. The other screws to remove are located inside the wheel arches of the rear wheels: when these are also unscrewed, you can completely detach the bumper to replace it with a new one.

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper of a Subaru Outback
How to Remove the Rear Bumper of a Subaru Outback
Subaru Outback (2014-2019 / BS, MK 5) To change the rear bumper of your Subaru Outback, you need to locate two small hidden openings in the bodywork of your vehicle. Here are the main scr…
How to Remove the Front Bumper of the Subaru Outback?
How to Remove the Front Bumper of the Subaru Outback?
Subaru Outback (2003-2009 / BL, BP, MK 3) To remove the front bumper of the Subaru Outback, first remove the fastening rivets and screws located at the bottom of the bumper, disconnecting the…
How to Remove the Bumper Cover of a 2008 Subaru Outback
How to Remove the Bumper Cover of a 2008 Subaru Outback
Subaru Outback (2003-2009 / BL, BP, MK 3) To remove the bumper cover of a 2008 Subaru Outback, first remove the rear lights, then use a screwdriver to extract the screws located on the sides …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos