Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Subaru
    3. :
  3. Forester
    4. : Light bulb

Subaru Forester - Light bulb

Light Bulb Subaru Forester (2012-2019 / mk 4, sj)

Subaru Forester (2012-2019 / MK 4, SJ)
How to replace the front headlight bulb on the Subaru Forester?
To replace the front headlight bulb on the Subaru Forester, open the bonnet to access the rear of the headlight: here you will need to disconnect the connector …Read all…
Posted on 6 August 2026 by ScegliAuto
Subaru Forester (2012-2019 / MK 4, SJ)
How to Replace the Rear Light Bulb on a Subaru Forester?
To replace the rear light bulb on a Subaru Forester, lift the tailgate to access the screws next to the light. These screws need to be loosened so that the …Read all…
Posted on 24 June 2026 by ScegliAuto
Airbag (1) Car stereo (3) Battery (8) Transmission (1) Spark plugs (4) Body (5) Glove compartment (1) Key (16) Timing belt (5) Onboard computer (1) Checks and maintenance (10) Dashboard (3) Brake rotors (1) Headlight (1) Tail light (4) Fog lights (1) Air filter (9) Cabin air filter (13) Fuel filter (1) Diesel fuel filter (2) Oil filter (2) Clutch (1) Light bulb (2) Headlight bulb (8) Tail light bulb (5) Interior dome light bulb (1) License plate light (2) Handle (2) Exhaust muffler (1) Engine (1) Starter motor (1) Transmission fluid (1) Engine oil (7) Clock (13) Door trim panel (10) Front bumper (4) Rear bumper (1) Brake pads (3) Shift knob (1) Fuel pump (1) Radiator (3) Fuse box (17) Seat (2) Oxygen sensor (1) Suspension system (6) Side mirror (6) Warning light – error code (13) (10) Tire pressure warning light (4) Service warning light (15) Manufacturer emblem (1) Windshield wipers (8) Thermostat (3) Blower motor (1) Side window (1) Steering wheel (1)

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos