Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Subaru
    3. :
  3. Forester
    4. : Transmission fluid

Subaru Forester - Transmission fluid

Transmission Fluid Subaru Forester (2012-2019 / mk 4, sj)

Subaru Forester (2012-2019 / MK 4, SJ)
Replacing the CVT Gearbox Oil on a 2015 Subaru Forester
Follow the main steps to replace the CVT gearbox oil on a fourth-generation Subaru Forester. First, lift the vehicle and remove the plastic cover over the …Read all…
Posted on 11 May 2026 by ScegliAuto
Airbag (1) Car stereo (3) Battery (8) Transmission (1) Spark plugs (4) Body (5) Glove compartment (1) Key (16) Timing belt (5) Onboard computer (1) Checks and maintenance (10) Dashboard (3) Brake rotors (1) Headlight (1) Tail light (4) Fog lights (1) Air filter (9) Cabin air filter (13) Fuel filter (1) Diesel fuel filter (2) Oil filter (2) Clutch (1) Light bulb (2) Headlight bulb (8) Tail light bulb (5) Interior dome light bulb (1) License plate light (2) Handle (2) Exhaust muffler (1) Engine (1) Starter motor (1) Transmission fluid (1) Engine oil (7) Clock (13) Door trim panel (10) Front bumper (4) Rear bumper (1) Brake pads (3) Shift knob (1) Fuel pump (1) Radiator (3) Fuse box (17) Seat (2) Oxygen sensor (1) Suspension system (6) Side mirror (6) Warning light – error code (13) (10) Tire pressure warning light (4) Service warning light (15) Manufacturer emblem (1) Windshield wipers (8) Thermostat (3) Blower motor (1) Side window (1) Steering wheel (1)

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos