Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of a Subaru Outback MK3

Model: Subaru Outback BL, BP, MK 3 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Door trim panel

See other generations:
Video tutorial

Discover the procedure necessary to remove the front door panel of the Subaru Outback MK3. First, open the front door and start by removing the small plastic cover found on the opening handle and the grab handle; then unscrew the screws located underneath using a crosshead screwdriver.

At this point, pry the sides of the panel to detach it from the rear clips; finally, disconnect the handle cable and the electrical connector of the switch to complete the operation!


Updated on 3 May 2026 by ScegliAuto


Related tutorials

Remove the Front Door Panel on the Subaru Outback MK3
Remove the Front Door Panel on the Subaru Outback MK3
Subaru Outback (2003-2009 / BL, BP, MK 3) In today's tutorial video, you will learn how to remove the front door panel on the third generation Subaru Outback by following these simple steps. …
How to Replace the External Handle on a Subaru Outback
How to Replace the External Handle on a Subaru Outback
Subaru Outback (2003-2009 / BL, BP, MK 3) To replace the external handle on a Subaru Outback, loosen the screws securing the corresponding door panel: these are located at the internal handle…
How to Replace the External Wing Mirror on a Subaru Outback?
How to Replace the External Wing Mirror on a Subaru Outback?
Subaru Outback (2003-2009 / BL, BP, MK 3) To replace the wing mirror on a Subaru Outback, first remove the door panel. To do this, unscrew the bolts located at the internal handle and under t…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos