Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Front Door Panel on the Subaru Outback MK3

Model: Subaru Outback BL, BP, MK 3 - Years 2003-2009
Part: Door trim panel

In today's tutorial video, you will learn how to remove the front door panel on the third generation Subaru Outback by following these simple steps. First, open the front door and remove the plastic covers on the door panel; then, unscrew all the fixing screws located underneath, as shown in the video. At this point, use something thin to pry at the sides to start detaching the panel; simply remove it by disconnecting the electric window connector and the opening handle cable!

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of a Subaru Outback MK3
How to Remove the Door Panel of a Subaru Outback MK3
Subaru Outback (2003-2009 / BL, BP, MK 3) Discover the procedure necessary to remove the front door panel of the Subaru Outback MK3. First, open the front door and start by removing the small…
Replace the Front Speakers of the Subaru Outback 23
Replace the Front Speakers of the Subaru Outback 23
Subaru Outback (2003-2009 / BL, BP, MK 3) Today, in this video tutorial, see how to remove and replace the front speakers of the third series Subaru Outback. First, open the front door and st…
How to Replace the External Handle on a Subaru Outback
How to Replace the External Handle on a Subaru Outback
Subaru Outback (2003-2009 / BL, BP, MK 3) To replace the external handle on a Subaru Outback, loosen the screws securing the corresponding door panel: these are located at the internal handle…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos