|
Do it yourself
| |||
| ||||
How to replace the headlight bulb of a Subaru Outback?
Model: Subaru Outback
BS, MK 5
- Years:
2014, 2015, 2016, 2017, 2018, 2019
Video tutorial
To replace the headlight bulb of a Subaru Outback, start by turning off the engine and making sure the headlights are off to avoid shocks or overheating. Open the hood using the release lever located inside the cabin and secure it in position with the support rod. Locate the back of the headlight inside the engine compartment. You may need to remove a rubber or plastic protective cover to access the bulb holder. Once you have uncovered the bulb holder, locate the electrical connector and disconnect it by gently pulling it. Rotate the bulb holder counterclockwise to release it from the headlight. Remove the old bulb and replace it with a new one of the same type and specification. Make sure not to touch the glass of the new bulb directly to prevent grease or dirt residues from reducing its lifespan. Insert the new bulb into the bulb holder, rotating it clockwise to securely fasten it. Reconnect the electrical connector and replace the protective cover, if present. Close the hood and turn on the headlights to verify that the new bulb is working correctly. If you encounter any issues, refer to the vehicle manual or seek assistance from a professional.
Posted on 9 January 2025 by ScegliAuto
Related tutorials
Subaru Outback
(2014-2019 /
BS, MK 5)
To replace the bulb on a Subaru Outback, open the bonnet to access the rear of the headlight: here you will find the connector that must be disconnec…
Subaru Outback
(2009-2014 /
BR, BM, MK 4)
To replace the bulb on the Subaru Outback, open the bonnet to access the rear of the headlight: here, you will find the connector that needs to be di…
Subaru Outback
(2009-2014 /
BR, BM, MK 4)
Replacing the front headlight bulbs in a Subaru Outback is very simple. Follow this tutorial to proceed. The video shows the operation with the headl…
Other guides you may be interested in
|
How to reset the tyre pressure warning light on the Kia Niro EV?
To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.186
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |