Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Wheel Hub of the Subaru Outback 4

Model: Subaru Outback BR, BM, MK 4 - Years: 2009, 2010, 2011, 2012, 2013, 2014
Part: Bearing

See other generations:
Video tutorial

In this video, follow the main steps to remove and replace the front wheel hub or bearing of the fourth-generation Subaru Outback. First, lift the vehicle and remove the front wheel; then, undo the bolts of the brake caliper to remove it, using leverage on the piston.

Next, undo the rear bolts of the driveshaft to remove the front brake disc; now, undo the central nut of the bearing to remove it. Replace the wheel hub and reassemble everything, following the tutorial video to the end!


Updated on 6 May 2026 by ScegliAuto


Related tutorials

Replacing the Dipped Beam Bulb on the Subaru Outback
Replacing the Dipped Beam Bulb on the Subaru Outback
Subaru Outback (2009-2014 / BR, BM, MK 4) Today, we will look at the main instructions to remove and replace the front headlight bulb on the Subaru Outback. To access the dipped beam bulb, it…
Replacing the Rear Hub Bearing
Replacing the Rear Hub Bearing
Subaru Outback (2009-2014 / BR, BM, MK 4) Replacing the rear hub bearing requires disassembling all components connected to the hub; start by lifting the vehicle and removing the rear wheel; …
Replacing the Front Brake Pads on the Subaru Outback MK4
Replacing the Front Brake Pads on the Subaru Outback MK4
Subaru Outback (2009-2014 / BR, BM, MK 4) In this video, learn how to remove and replace the front brake discs and pads on the fourth series Subaru Outback, following the instructions below. …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos