Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Hub Bearing

Model: Subaru Outback BR, BM, MK 4 - Years: 2009, 2010, 2011, 2012, 2013, 2014
Part: Bearing

See other generations:
Video tutorial

Replacing the rear hub bearing requires disassembling all components connected to the hub; start by lifting the vehicle and removing the rear wheel; then proceed to remove the brake caliper directly from the bracket, the four rear bolts from the drum, and then the brake disc; remove the hub nut from the driveshaft and, before completely removing the nut, give it a few taps with a hammer to loosen the hub complete with shoes.

At this point, extract the hub complete with bearing and replace it with a new one, proceeding in reverse order.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Replacing the Front Hub Bearing
Replacing the Front Hub Bearing
Subaru Outback (2009-2014 / BR, BM, MK 4) After raising the vehicle on a lift, remove the front wheel that requires maintenance; detach the brake caliper from the bracket after slightly sprea…
Instructions for Half Shaft Replacement
Instructions for Half Shaft Replacement
Subaru Outback (1999-2003 / BH, BE, MK 2) Lift the vehicle on suitable car stands and remove the wheel corresponding to the repair area. Before removing the half shaft, locate the hole on the…
Replacing the Front Wheel Hub of the Subaru Outback 4
Replacing the Front Wheel Hub of the Subaru Outback 4
Subaru Outback (2009-2014 / BR, BM, MK 4) In this video, follow the main steps to remove and replace the front wheel hub or bearing of the fourth-generation Subaru Outback. First, lift the ve…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos