Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Subaru
    3. :
  3. Outback
    4. : Bearing

Subaru Outback - Bearing

Bearing Subaru Outback (2009-2014 / mk 4, bm, br)

Subaru Outback (2009-2014 / MK 4, BM, BR)
Replacing the Front Wheel Hub of the Subaru Outback 4
In this video, follow the main steps to remove and replace the front wheel hub or bearing of the fourth-generation Subaru Outback. First, lift the vehicle and …Read all…
Posted on 24 June 2026 by ScegliAuto
Subaru Outback (2009-2014 / MK 4, BM, BR)
Replacing the Rear Hub Bearing
Replacing the rear hub bearing requires disassembling all components connected to the hub; start by lifting the vehicle and removing the rear wheel; then …Read all…
Posted on 17 February 2026 by ScegliAuto
Subaru Outback (2009-2014 / MK 4, BM, BR)
Replacing the Front Hub Bearing
After raising the vehicle on a lift, remove the front wheel that requires maintenance; detach the brake caliper from the bracket after slightly spreading the …Read all…
Posted on 16 February 2026 by ScegliAuto
Cigarette lighter (1) Airbag (1) Speaker (2) Air conditioning (2) Car stereo (1) Battery (6) Control arm (2) Spark plugs (3) Body (1) Key (18) Timing belt (3) V-belt (2) Onboard computer (4) Checks and maintenance (9) Bearing (3) Brake rotors (4) Rear bench seat (1) Headlight (2) Tail light (2) Fog lights (3) Air filter (12) Cabin air filter (8) Fuel filter (3) Grille (1) Light bulb (2) Side marker bulb (1) Headlight bulb (6) Tail light bulb (8) License plate light (1) Handle (1) Exhaust muffler (1) Engine (4) Power window motor (1) Engine oil (3) Clock (8) Door trim panel (5) Front bumper (1) Rear bumper (3) Brake pads (4) Fuel pump (1) Instrument cluster (1) Radiator (2) Wheel (1) Fuse box (15) Seat (5) Axle shaft (4) Suspension system (1) Side mirror (1) Warning light – error code (9) (7) Tire pressure warning light (6) Service warning light (12) Fuel cap (1) Windshield wipers (5) Valve (1) Blower motor (1) Steering wheel (2)

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos