Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulbs in the Subaru Forester?

Model: Subaru Forester MK 4, SJ - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

In this tutorial we can see how to replace the front headlight bulbs in the Subaru Forester, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can work in complete safety, then open the hood, locate the bulb holder located on the back of the headlight in question and remove it by rotating it slightly counterclockwise.

Next, disconnect the power connector, connect the replacement bulb, reassemble everything following the reverse procedure and repeat the operation for the opposite side, if necessary.


Posted on 28 October 2025 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulbs on the Subaru Forester?
How to Replace the Front Headlight Bulbs on the Subaru Forester?
Subaru Forester (2008-2011 / MK 3, SH) In this tutorial, you will see how to replace the front headlight bulbs on the Subaru Forester, a very simple and quick operation. First, ensure that…
How to Replace the Front Headlight Bulbs on Subaru Forester
How to Replace the Front Headlight Bulbs on Subaru Forester
Subaru Forester (2008-2011 / MK 3, SH) Let's see how to replace the front headlight bulbs on a Subaru Forester. Open the bonnet by pulling the lever located at the bottom right of the dash…
How to Replace the Dipped Beam Bulbs on a Subaru Forester?
How to Replace the Dipped Beam Bulbs on a Subaru Forester?
Subaru Forester (2008-2011 / MK 3, SH) In this tutorial, see how to replace the dipped beam bulbs on a Subaru Forester. This operation is very simple and quick. To do this, first ensure th…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos