Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dipped Beam Bulbs on a Subaru Forester?

Model: Subaru Forester SH, MK 3 - Years 2008-2011
Part: Headlight bulb

In this tutorial, see how to replace the dipped beam bulbs on a Subaru Forester. This operation is very simple and quick. To do this, first ensure that the key is not inserted. Next, open the bonnet and unscrew the large rear cap of the headlight where you will replace the bulb. For the driver's side, you may temporarily remove the windscreen washer fluid tube if it is too intrusive. Once the headlight is open, disconnect the power connector and extract the bulb by turning it slightly anti-clockwise.

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Dipped Beam Bulbs in a Subaru Forester?
How to Replace the Dipped Beam Bulbs in a Subaru Forester?
Subaru Forester (2008-2011 / SH, MK 3) In this tutorial, see how to replace the dipped beam bulbs in a Subaru Forester, a very simple and quick operation. For the passenger side, first rem…
How to replace the front headlight bulbs in the Subaru Forester?
How to replace the front headlight bulbs in the Subaru Forester?
Subaru Forester (2008-2011 / SH, MK 3) In this tutorial we can see how to replace the front headlight bulbs in the Subaru Forester, an extremely simple and quick operation. First of all, m…
How to replace the front headlight bulbs in the Subaru Forester?
How to replace the front headlight bulbs in the Subaru Forester?
Subaru Forester (2012-2019 / MK 4, SJ) In this tutorial we can see how to replace the front headlight bulbs in the Subaru Forester, an extremely simple and quick operation. First of all, m…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos