Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlights on the Subaru Forester

Model: Subaru Forester MK 4, SJ - Years 2012-2019
Part: Headlight

In this brief and simple guide, follow the step-by-step instructions to remove and replace the front headlight on the Subaru Forester. First, open the bonnet of your car and begin removing the front bumper; to do this, remove all the plastic clips located above and below the bumper, as well as any additional clips and screws found on both sides of the front wheel arches, as shown in the video. Now gently detach the bumper, then unscrew the headlight screws; disconnect the electrical connector for the bulbs to remove it, and install the new headlight unit!

Updated on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulbs in the Subaru Forester?
How to replace the front headlight bulbs in the Subaru Forester?
Subaru Forester (2008-2011 / SH, MK 3) In this tutorial we can see how to replace the front headlight bulbs in the Subaru Forester, an extremely simple and quick operation. First of all, m…
How to replace the front headlight bulbs in the Subaru Forester?
How to replace the front headlight bulbs in the Subaru Forester?
Subaru Forester (2012-2019 / MK 4, SJ) In this tutorial we can see how to replace the front headlight bulbs in the Subaru Forester, an extremely simple and quick operation. First of all, m…
Where Are the Fuses on a Subaru Forester?
Where Are the Fuses on a Subaru Forester?
Subaru Forester (2002-2008 / SG, MK 2) The fuses on a Subaru Forester are located within the corresponding fuse boxes installed in the vehicle: in this type of car, you will find two boxes…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos