Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulbs in the Subaru Forester?

Model: Subaru Forester SH, MK 3 - Years 2008-2011
Part: Headlight bulb

In this tutorial we can see how to replace the front headlight bulbs in the Subaru Forester, an extremely simple and quick operation. First of all, make sure that the key is not inserted, then open the hood, locate the large cap located on the back of the headlight in question and unscrew it. Next, disconnect the power connector, grab the old bulb and, by rotating it slightly counterclockwise, remove it from the housing. At this point we can insert the replacement, avoiding touching the glass with bare hands, and follow the reverse procedure.

Posted on 24 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulbs on Subaru Forester
How to Replace the Front Headlight Bulbs on Subaru Forester
Subaru Forester (2008-2011 / SH, MK 3) Let's see how to replace the front headlight bulbs on a Subaru Forester. Open the bonnet by pulling the lever located at the bottom right of the dash…
How to replace the front headlight bulbs in the Subaru Forester?
How to replace the front headlight bulbs in the Subaru Forester?
Subaru Forester (2012-2019 / MK 4, SJ) .. In this tutorial we can see how to replace the front headlight bulbs in the Subaru Forester, an extremely simple and quick operation... …
How to replace the front headlight bulb on the Subaru Forester?
How to replace the front headlight bulb on the Subaru Forester?
Subaru Forester (2012-2019 / MK 4, SJ) To replace the front headlight bulb on the Subaru Forester, open the bonnet to access the rear of the headlight: here you will need to disconnect the…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos