Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Subaru
    3. :
  3. Forester
    4. : Subaru Forester rear light bulb replacement

Subaru Forester - Video tutorial

Model: Subaru Forester SJ, MK 4 - Years 2012-2019
Part: Rear light bulb
Operation: Subaru Forester rear light bulb replacement

Let's see in this short guide, the instructions on how to disassemble and replace the rear light bulbs of the Subaru Forester. First we open the tailgate of the boot and start unscrewing the fixing screws that we find on the sides of the light; after which we disconnect the electrical connector of the bulbs, as shown in the video. At this point we replace the small bulb bulbs with new ones, having the same attack; install them correctly inside the headlight and reassemble the headlight on the bodywork, following the video tutorial to the end!


Posted on 24 July 2022 by ScegliAuto



How to replace the rear light bulb in the Subaru Forester?
Subaru Forester (2008-2011 / MK 3, SH) Replacing the rear light bulb of the Subaru Forester is a very simple operation, we obviously need a 10mm socket wrench in addition to the spare bulb
How to replace the rear light bulb on the Subaru Forester?
Subaru Forester (2012-2019 / SJ, MK 4) In order to replace the rear light bulb of the Subaru Forester you need to lift the tailgate of the rear compartment so that you can have access to t
How to replace the rear light bulb on Subaru Forester
Subaru Forester (2012-2019 / SJ, MK 4) Today we will see, in this video tutorial, how to remove and replace the rear light bulb of the Subaru Forester, following these simple and quick ste

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos