Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs on the Subaru Forester

Model: Subaru Forester MK 4, SJ - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light bulb

See other generations:
Video tutorial

This guide will show you how to remove and replace the rear light and its bulbs on the Subaru Forester in simple steps. First, open the boot lid and start unscrewing the fixing screws located on the side of the light; then disconnect the electrical connector of the bulbs, as illustrated in the video.

At this point, replace the stop lights or the entire rear light, reconnecting it and checking its proper operation; finally, secure the light to the bodywork!


Posted on 15 June 2026 by ScegliAuto


Related tutorials

Removing the rear light of the Subaru Forester
Removing the rear light of the Subaru Forester
Subaru Forester (2008-2011 / MK 3, SH) Today's guide will show you how to remove and replace the rear light of the Subaru Forester, following the instructions below. First, move to the rea…
Replacing the Rear Light Bulbs on the Subaru Forester
Replacing the Rear Light Bulbs on the Subaru Forester
Subaru Forester (2012-2019 / MK 4, SJ) In this brief guide, we will see the instructions on how to remove and replace the rear light bulbs on the Subaru Forester. First, open the tailgate …
How to Replace the Dipped Beam Bulbs on a Subaru Forester?
How to Replace the Dipped Beam Bulbs on a Subaru Forester?
Subaru Forester (2008-2011 / MK 3, SH) In this tutorial, see how to replace the dipped beam bulbs on a Subaru Forester. This operation is very simple and quick. To do this, first ensure th…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos