Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlamp Bulb on a Subaru Forester?

Model: Subaru Forester SH, MK 3 - Years 2008-2011
Part: Tail light bulb

Replacing the rear headlamp bulb on a Subaru Forester is a very simple task. You will need a replacement bulb and a 10mm socket. Open the boot lid and, using the socket, remove the two bolts located on the inside of the lamp. Now pull the unit towards you, being careful not to damage the cable. To remove the bulb from the holder, simply grip the bulb holder and turn it 90 degrees counterclockwise. To reassemble everything, just follow the same procedure in reverse.

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Indicators on a Subaru Forester
How to Replace the Indicators on a Subaru Forester
Subaru Forester (2018-2025 / MK 5, SK) Today, learn how to replace the direction indicators on a 2018 Subaru Forester. Start by following these steps. Open the boot of the vehicle. Remove …
How to Replace the Dipped Beam Bulbs in a Subaru Forester?
How to Replace the Dipped Beam Bulbs in a Subaru Forester?
Subaru Forester (2008-2011 / SH, MK 3) In this tutorial, see how to replace the dipped beam bulbs in a Subaru Forester, a very simple and quick operation. For the passenger side, first rem…
How to replace the front headlight bulb on the Subaru Forester?
How to replace the front headlight bulb on the Subaru Forester?
Subaru Forester (2012-2019 / MK 4, SJ) To replace the front headlight bulb on the Subaru Forester, open the bonnet to access the rear of the headlight: here you will need to disconnect the…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos